Bis(2-cyanoethyl) di(prop-2-yl)phosphoramidoite, Bis(2-cyanoethyl) N,N-diisopropylphosphoramidite
bis(2-cyanoethyl) diisopropylphosphoramidite
CAS: 102690-88-0
Molecular Formula: C12H22N3O2P
Bis(2-cyanoethyl) di(prop-2-yl)phosphoramidoite, Bis(2-cyanoethyl) N,N-diisopropylphosphoramidite - Names and Identifiers
Bis(2-cyanoethyl) di(prop-2-yl)phosphoramidoite, Bis(2-cyanoethyl) N,N-diisopropylphosphoramidite - Physico-chemical Properties
| Molecular Formula | C12H22N3O2P |
| Molar Mass | 271.296 |
| Density | 1.039 g/mL at 25 °C |
| Boling Point | 335.3±27.0 °C(Predicted) |
| Flash Point | 73℃ |
| Appearance | Clear or slightly yellow Liquid |
| pKa | 3.11±0.70(Predicted) |
| Storage Condition | -20°C |
| Refractive Index | n20/D1.465 |
Bis(2-cyanoethyl) di(prop-2-yl)phosphoramidoite, Bis(2-cyanoethyl) N,N-diisopropylphosphoramidite - Risk and Safety
| Risk Codes | R23 - Toxic by inhalation R24 - Toxic in contact with skin R25 - Toxic if swallowed R36 - Irritating to the eyes R38 - Irritating to the skin |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 - Wear suitable protective clothing. S37 - Wear suitable gloves. S39 - Wear eye / face protection. S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) |
| UN IDs | UN 2810 6.1 / PGIII |
| WGK Germany | 3 |
| Hazard Class | IRRITANT |
Bis(2-cyanoethyl) di(prop-2-yl)phosphoramidoite, Bis(2-cyanoethyl) N,N-diisopropylphosphoramidite - Introduction
bis(2-cyanoethyl) diisopropylphosphoramidite is an organophosphorus compound with the chemical formula C10H18N3OP. Here is some information about it:
Nature:
-Appearance: colorless liquid
-Molecular weight: 227.26g/mol
-Boiling point: 160-165 ° C
-Melting point:-57 ° C
Use:
bis(2-cyanoethyl) diisopropylphosphoramidite is commonly used as an important reagent in the chemical synthesis of nucleic acids. It can be used as a phosphorylating reagent in the synthesis of DNA and RNA, and also in solid-phase synthesis reactions.
Method:
bis(2-cyanoethyl) diisopropylphosphoramidite can be prepared by the reaction of triethylamino chlorocyanophos and diisopropyl alcohol. Specific steps involve mixing and heating the reactants, followed by crystallization or distillation purification.
Safety Information:
- bis(2-cyanoethyl) diisopropylphosphoramidite is an irritating chemical. Contact with skin and eyes may cause irritation and burns. Please be careful to avoid direct contact.
-Wear appropriate personal protective equipment such as laboratory gloves and goggles during use.
-should be in a well ventilated place to operate, avoid inhalation of gas or steam.
-Should be stored in a closed container, away from fire and oxidizing agents.
Please note that the above information is for reference only. Refer to the official Chemical Safety Data Sheet (MSDS) and other relevant safety guidelines when using or handling this compound.
Nature:
-Appearance: colorless liquid
-Molecular weight: 227.26g/mol
-Boiling point: 160-165 ° C
-Melting point:-57 ° C
Use:
bis(2-cyanoethyl) diisopropylphosphoramidite is commonly used as an important reagent in the chemical synthesis of nucleic acids. It can be used as a phosphorylating reagent in the synthesis of DNA and RNA, and also in solid-phase synthesis reactions.
Method:
bis(2-cyanoethyl) diisopropylphosphoramidite can be prepared by the reaction of triethylamino chlorocyanophos and diisopropyl alcohol. Specific steps involve mixing and heating the reactants, followed by crystallization or distillation purification.
Safety Information:
- bis(2-cyanoethyl) diisopropylphosphoramidite is an irritating chemical. Contact with skin and eyes may cause irritation and burns. Please be careful to avoid direct contact.
-Wear appropriate personal protective equipment such as laboratory gloves and goggles during use.
-should be in a well ventilated place to operate, avoid inhalation of gas or steam.
-Should be stored in a closed container, away from fire and oxidizing agents.
Please note that the above information is for reference only. Refer to the official Chemical Safety Data Sheet (MSDS) and other relevant safety guidelines when using or handling this compound.
Last Update：2024-04-10 22:29:15
Supplier List
Product Name: Bis(2-Cyanoethyl)-N,N-Diisopropyl Phosphoramidite Visit Supplier Webpage Request for quotation
CAS: 102690-88-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 102690-88-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: Bis(2-Cyanoethyl)-N,N-Diisopropyl Phosphoramidite Visit Supplier Webpage Request for quotation
CAS: 102690-88-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 102690-88-0
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History
Bis(2-cyanoethyl) di(prop-2-yl)phosphoramidoite, Bis(2-cyanoethyl) N,N-diisopropylphosphoramidite
L-(+)-Fructose
L-(+)-Fructose